Printed on 12/12/2024
Diesel Construction Equipment Service Technician (FABTECH)
32-412-3
Technical Diploma (TD)
Full Time
55 Credits
Learn About Financial Aid Available
Location*:
Oshkosh
*If general education courses are required, they may be available at multiple locations.
Get the skills you need to perform preventive maintenance, field service and repairs on a variety of compact and heavy Caterpillar® construction equipment. You’ll also obtain skills in engine testing, diagnostics, engine overhauling, air conditioning and shop safety. In a year, you could be on the job earning a good income at [Fabick Cat](https://www.fabickcat.com/our-company/education-programs/), your exclusive Cat Dealer for the entire state of Wisconsin, the Upper Peninsula of Michigan and throughout major portions of Missouri and Illinois. This technical diploma is one of two required. The 40 credits earned in the Diesel Engine Service Technician program will apply, leaving you with just 15 additional credits needed to complete this technical diploma.
COURSE LIST
Print Page
Course list for reference only. Current students please refer to your individualized program plan or see your advisor.
**Outside effort hours are an estimate based on state standards, and may vary from person to person.
Occupational Specific
(53 Credits)
-
Diesel Equipment Internship
10-412-129
1Credit
216
0
N/A
- Instructional Hours: 216
- Outside Effort Hours: 0
- Course Number: 10412129
- Credits: 1.00
Provides students with work experience on actual vehicles in area shops.
-
FABTECH Air Conditioning
10-412-141
2Credit
54
54
N/A
- Instructional Hours: 54
- Outside Effort Hours: 54
- Course Number: 10412141
- Credits: 2.00
Provides students with the knowledge and skills to service and repair heating and air conditioning systems. Hands-on activities include charging, discharging and leak detection. Students will receive federal AG-136 certification. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Preventive Maint & Equipment Repair
10-412-142
5Credit
108
162
N/A
- Instructional Hours: 108
- Outside Effort Hours: 162
- Course Number: 10412142
- Credits: 5.00
Focuses on the inspection and lubrication of a variety of equipment. Students will collect oil samples and complete general repairs and adjustments to a variety of small construction equipment. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Shop Practices, Introduction to
10-412-143
4Credit
90
126
N/A
- Instructional Hours: 90
- Outside Effort Hours: 126
- Course Number: 10412143
- Credits: 4.00
Focuses on the safe and proper operation of hand tools and shop equipment. Students learn the proper lifting and blocking procedures for a variety of equipment, following MSHA and OSHA regulations. Students will learn basic first aid and become familiar with shop operations. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Hydraulic Systems 2
10-412-145
5Credit
126
144
N/A
- Instructional Hours: 126
- Outside Effort Hours: 144
- Course Number: 10412145
- Credits: 5.00
Focuses on the skills needed to diagnose, service and repair hydraulic systems found on off-road construction equipment. Students will learn how to diagnose pumps, valves, cylinders, motors and electronic controlled valves. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Construction Drive Train 1
10-412-146
5Credit
126
144
N/A
- Instructional Hours: 126
- Outside Effort Hours: 144
- Course Number: 10412146
- Credits: 5.00
Focuses on the operation and maintenance of the power train. Students learn the procedures for overhauling, adjusting and troubleshooting heavy duty transmissions and various final drives. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Construction Drive Train 2
10-412-147
4Credit
90
126
N/A
- Instructional Hours: 90
- Outside Effort Hours: 126
- Course Number: 10412147
- Credits: 4.00
Focuses on failure analysis to determine root cause of various drive train system failures. Students will learn how to interpret codes used to identify errors within different power train computer controlled systems. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Engine Rebuilding
10-412-148
5Credit
126
144
N/A
- Instructional Hours: 126
- Outside Effort Hours: 144
- Course Number: 10412148
- Credits: 5.00
Teaches students to disassemble, identify each part, measure all wear points and make reuse recommendations, analyze failed components, and reassemble two electronic controlled diesel engines. Component analysis, function and operation theories of the diesel engine are lecture topics studied.
-
FABTECH Engine Testing & Diagnostics
10-412-150
5Credit
126
144
N/A
- Instructional Hours: 126
- Outside Effort Hours: 144
- Course Number: 10412150
- Credits: 5.00
Focuses on key troubleshooting skills and methodology. Engine system testing procedures and tools are used to analyze symptom-based engine problems. Application of computer diagnostic tools is employed in actual live testing situations. Engine operation will also be part of this course.
-
FABTECH Electrical 1
10-412-151
5Credit
126
144
N/A
- Instructional Hours: 126
- Outside Effort Hours: 144
- Course Number: 10412151
- Credits: 5.00
Introduces the student to basic electrical and electronic fundamentals needed by a technician to properly diagnose and repair complex electrical and electronic systems installed in various Caterpillar machines. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Fuel Systems 2
10-412-157
4Credit
90
126
N/A
- Instructional Hours: 90
- Outside Effort Hours: 126
- Course Number: 10412157
- Credits: 4.00
Enhances the ability to understand advanced fuel systems to properly diagnose, tune-up, repair and replace components in complex fuel systems installed in Caterpillar engines.
-
FABTECH Hydraulic Systems 1
10-412-164
3Credit
72
90
N/A
- Instructional Hours: 72
- Outside Effort Hours: 90
- Course Number: 10412164
- Credits: 3.00
Focuses on basic hydraulic principles and systems. Hands-on activities include replacing hoses, cylinders and performing minor maintenance on hydraulic pumps and motors. This course is part of a training program called FABTECH, which is developed specifically for Fabick Cat, and participants are subject to screening by Fabick Cat, the sponsoring company.
-
FABTECH Fuel Systems 1
10-412-172
3Credit
72
90
N/A
- Instructional Hours: 72
- Outside Effort Hours: 90
- Course Number: 10412172
- Credits: 3.00
Introduces the student to the various fuel systems and teaches the fundamentals needed by a technician to properly diagnose and repair complex fuel systems installed in various Caterpillar machines.
-
FABTECH Applied Welding
10-442-103
2Credit
54
54
N/A
- Instructional Hours: 54
- Outside Effort Hours: 54
- Course Number: 10442103
- Credits: 2.00
Acquaints students with the common welding techniques and procedures for arc and oxyacetylene welding in all positions. Topics include fusion welding, brazing, cutting, metal identification, selection of electrodes and American Welding Society symbols.
Occupational Supportive
(2 Credits)
-
FABTECH Applied Communication
31-801-318F
2Credit
72
36
N/A
- Instructional Hours: 72
- Outside Effort Hours: 36
- Course Number: 31801318F
- Credits: 2.00
Focuses on technical vocabulary, business writing, job search strategies, interpersonal communication and oral presentation skills through individual and group activities. Open enrollment for all students. It is recommended, but not required, that the student have basic computer skills, HS GPA 2.75+ OR ACPL Read 54+/Sent 83+, Next Gen Read 250+/Sent 237+, ACT Read 18+/Engl 15+ OR Read Prep 10838105/Sent Prep 74851745 OR not pursuing a degree. Personal/professional development students who have not taken the ACCUPLACER test need to consult with their instructor during the first class..